Platinum 252 LED Colour Changing Pool Light

SURFACE MOUNT PBS 252 SS

Lights: 252 LEDs, 16 modes
Voltage: 12V AC
Maximum Current: 550ma (0.55A)

PHYSICAL SPECIFICATION
Diameter: 315mm
Depth: 65mm
Other Properties:
304 Stainless, U.V. Resistant
Polycarbonate lens, 316 Stainless Screws

WARRANTY TERMS

PBS 252 has a 2 year Pro-rata workmanship warranty against leakage and rust. (1 year full replacement inc return postage, 12 to 18 month 25% replacement cost plus postage & handling, 18month to 24 month 50% replacement.
PBP 126 & PBS 126 has 1 year full replacement warranty.
Any warranty claims should be directed immediately to your supplier for further investigation.
The light should be removed from the pool should any leakage into the bulb area occur and washed with tap water.
DO NOT ATTEMPT TO UNDO SCREWS AT THE BACK OF THE LIGHT. THIS WILL VOID YOUR WARRANTY
Remotes and Power supplies are subject to manufacturers warranty
Any rust on the stainless steel should only occur if the ph of the pool drops below 7.0 or the light is left outside the water for extended periods.
No warranty will be given on lens or wire breakage during installation.
All splices are done by the installer and are subject to that persons warranty
A new splicing kit (free of charge) will be sent with every returned light or are available from pool shops.

Please don’t hesitate contacting me if you require any further information or advice.

WARNING DO NOT POUR HYDROCHLORIC ACID WITHIN 2 METERS OF THE STAINLESS LIGHT IT WILL PIT AND VOID WARRANTY

SERVICE & INFORMATION

1800 2782 7547

1800 - AQUA SKIP

Return to LED Pool Lights

Platinum Series LED Pool Lights

LED Pool Lighting by POOL BITS Quality Products